...
Items in <> are field names in the source dataset, i.e. crosswalk. These are dynamically filed when actually saving data to ST. For example the value for a Location/name is not a static value; each location has a different name. Therefore for my convenience Im listing the field name from the source dataset.
S? = Question for Stacy
<?>= field name TBD
PODS
SensorThings Entity | Name | Description | Properties (additional metadata associated with each entity) |
|---|
Location | <pod_basin>. |
<pdd<pod_nbr>.<pod_suffix> | ? | ? |
Thing | POD
| Point of Diversion
| ? |
Ground Water Levels
NMBGMR Ground Water Levels
...
SensorThings Entity | Name | Description | Properties (additional metadata associated with each entity) |
|---|
Location | <PointID> | Site where measurements are made (in this case groundwater level measurement below land surface)
| AltDatum: <AltDatum>
Altitude: <Altitude>
AltSource: <Location.AltitudeMethod><LU_AltitudeMethod>
|
Thing | Water Well
| Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater
| WellDepth: <WellData.WellDepth>
GeologicFormation: <WellData.FormationZone>
ScreenTop: <WellScreens.ScreenTop>
ScreenBottom: <WellScreens.ScreenBottom>
|
Datastream | Ground Water Levels
| Measurement of static groundwater depth in a water well, as measured below land surface
| Agency: NMBGMR
|
ObservedProperty | Depth to Water Below Land Surface
| depth to water below land surface (NOTE: THIS IS NOT ELEVATION of Water, if elevation is reported, depth to water below land surface must be calculated using land elevation and measuring point.)
| |
Sensor | Pressure
| Continuous measurement depth to water in Feet below ground surface (converted from pressure reading and QC’ed from depth below land surface in feet)
| |
Sensor | Acoustic
| Continuous measurement depth to water in Feet below ground surface (converted from acoustic device, QC’ed)
| |
Sensor | Manual
| Manual measurement of groundwater depth by steel tape or electronic probe or other
| MeasurementMethod: <LU_MeasurementMethod.Meaning>
|
CABQ Ground Water Levels
SensorThings Entity | Name | Description | Properties (additional metadata associated with each entity) |
|---|
Location | <loc_name> | Site where measurements are made
| |
Thing | Water Well
| Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater
| |
Datastream |
Groundwater Ground Water Levels
| Measurement of static groundwater depth in a water well, as measured below land surface
| Agency: CABQ
|
ObservedProperty | Depth to Water Below Land Surface
| depth to water below land surface
| |
Sensor | <?> | <?> | |
Analytical Chemistry
NMBGMR chem
SensorThings Entity | Name | Description | Properties (additional metadata associated with each entity) |
|---|
Location | <PointID> | Site where measurements are made
| |
Thing | Water Well
| | |
Datastream | Analytical Chemistry
| | Agency: NMBGMR
|
ObservedProperty | Ca
| Calcium
| |
ObservedProperty | Na
| Sodium
| |
ObservedProperty | TDS
| Total Dissolved Solids
| |
ObservedProperty |
S? What is comprehensive list of analytes you want to share | S? | S?CABQ Analytical Chemistry
SensorThings Entity | Name | Description | Properties (additional metadata associated with each entity) |
|---|
Location | <loc_name> | Site where measurements are made
| |
Thing | Water Well
| | |
Datastream | Analytical Chemistry
| | Agency: CABQ
|
ObservedProperty | Ca
| Calcium
| |
ObservedProperty | Na
| Sodium
| |
ObservedProperty | TDS
| Total Dissolved Solids
| |
ObservedProperty | ? | ? | |
Sensor | ? | ? | |