Location

<PointID>

Site Location of well where measurements are made (in this case groundwater level measurement below land surface)

AltDatum: <AltDatum>

Altitude: <Altitude>

AltSource: <Location.AltitudeMethod><LU_AltitudeMethod>

Agency: NMBGMR

Thing

Water Well

Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater

WellDepth: <WellData.WellDepth>

GeologicFormation: <WellData.FormationZone>

ScreenTop: <WellScreens.ScreenTop>

ScreenBottom: <WellScreens.ScreenBottom>

Agency: NMBGMR

Use:

Datastream

Ground Water Groundwater Levels

Measurement of static groundwater depth in a water well, as measured below land ground surface

Agency: NMBGMR

MeasuringPointHeightRelativeToGroundSurface:

MeasuringPointHeightRelativeToGroundSurfaceUnits:

MeasuringPointHeightRelativeToGroundSurfaceDescription:

QualityControlled:

ObservedProperty

Depth to Water Below Land Ground Surface

depth Depth to water below land surface (NOTE: THIS IS NOT ELEVATION of Water, if elevation is reported, depth to water below land surface must be calculated using land elevation and measuring point.)ground surface

Sensor

Pressure

Continuous (periodic automated) measurement depth to water in Feet below ground surface (converted from pressure reading and QC’ed from depth below land ground surface in feet). Not Provisional. Quality Controlled

Agency: NMBGMR

Sensor

Acoustic

Continuous (periodic automated) measurement depth to water in Feet below ground surface (converted from acoustic device, QC’ed)). Not Provisional. Quality Controlled

Agency: NMBGMR

Sensor

Manual

Manual measurement of groundwater depth by steel tape or , electronic probe or other

MeasurementMethod: <LU_MeasurementMethod.Meaning>

Agency: NMBGMR
MeasurementStatus: