These are literals. Meaning that it is literally the value stored for that field. For example the value for a Thing/name is Water Well and the Description is Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater

Items in <> are field names in the source dataset, i.e. crosswalk. These are dynamically filed when actually saving data to ST. For example the value for a Location/name is not a static value; each Location has a different name. Therefore for my convenience Im listing the field name from the source dataset.

<?>= field name TBD

PODS

SensorThings Entity	Name	Description	Properties (additional metadata associated with each entity)
Location	<pod_basin>.<pod_nbr>.<pod_suffix>	?	?
Thing	`POD`	`Point of Diversion`	?

Location Fields

type	`Point`
X	<easting>
Y	<northing>
Zone	<utm_zone>

Ground Water Levels

NMBGMR Ground Water Levels

SensorThings Entity	Name	Description	Properties (additional metadata associated with each entity)
Location	<PointID>	`Site where measurements are made` (in this case groundwater level measurement below land surface)	`AltDatum`: <AltDatum> `Altitude`: <Altitude> `AltSource`: <Location.AltitudeMethod><LU_AltitudeMethod> `Agency: NMBGMR`
Thing	`Water Well`	`Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater`	`WellDepth`: <WellData.WellDepth> `GeologicFormation`: <WellData.FormationZone> `ScreenTop`: <WellScreens.ScreenTop> `ScreenBottom`: <WellScreens.ScreenBottom> `Agency: NMBGMR`
Datastream	`Ground Water Levels`	`Measurement of static groundwater depth in a water well, as measured below land surface`	`Agency: NMBGMR`
ObservedProperty	`Depth to Water Below Land Surface`	`depth to water below land surface` (NOTE: THIS IS NOT ELEVATION of Water, if elevation is reported, depth to water below land surface must be calculated using land elevation and measuring point.)
Sensor	`Pressure`	`Continuous measurement depth to water in Feet below ground surface (converted from pressure reading and QC’ed from depth below land surface in feet)`	`Agency: NMBGMR`
Sensor	`Acoustic`	`Continuous measurement depth to water in Feet below ground surface (converted from acoustic device, QC’ed)`	`Agency: NMBGMR`
Sensor	`Manual`	`Manual measurement of groundwater depth by steel tape or electronic probe or other`	`MeasurementMethod`: <LU_MeasurementMethod.Meaning>`Agency: NMBGMR`

Location Fields

type	`Point`
X	<easting>
Y	<northing>
Zone	12

CABQ Ground Water Levels

SensorThings Entity	Name	Description	Properties (additional metadata associated with each entity)
Location	<loc_name>	`Site where measurements are made`	`Agency: CABQ`
Thing	`Water Well`	`Well drilled or set into subsurface for the purposes of pumping water or monitoring groundwater`	`Agency: CABQ`
Datastream	`Ground Water Levels`	`Measurement of static groundwater depth in a water well, as measured below land surface`	`Agency: CABQ`
ObservedProperty	`Depth to Water Below Land Surface`	`depth to water below land surface`
Sensor	<?>	<?>

Analytical Chemistry

NMBGMR chem

SensorThings Entity	Name	Description	Properties (additional metadata associated with each entity)
Location	<PointID>	`Site where measurements are made`
Thing	`Water Well`
Datastream	`Analytical Chemistry`		`Agency: NMBGMR`
ObservedProperty	`Ca`	`Calcium`
ObservedProperty	`Na`	`Sodium`
ObservedProperty	`TDS`	`Total Dissolved Solids`
ObservedProperty
Sensor

CABQ Analytical Chemistry

SensorThings Entity	Name	Description	Properties (additional metadata associated with each entity)
Location	<loc_name>	`Site where measurements are made`
Thing	`Water Well`
Datastream	`Analytical Chemistry`		`Agency: CABQ`
ObservedProperty	`Ca`	`Calcium`
ObservedProperty	`Na`	`Sodium`
ObservedProperty	`TDS`	`Total Dissolved Solids`
ObservedProperty	?	?
Sensor	?	?

SensorThings Entity names